TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 823 of 1390

TM 9-2320-328-13&P-2

0237-3

DRAFT

0237

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

4.

Remove nut (11), lockwasher (12), two washers (13), clip (14), and screw (15) from 24-volt 10 amp per bank

battery charger (16) and bracket (17).

Discard lockwasher.

5.

Remove three nuts (18), lockwashers (19), six washers (20), three screws (21), and 24-volt 10 amp per bank

battery charger (16) from bracket (17).

Discard lockwashers.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT1263

NOTE

•

The 10 amp per bank battery charger has been replaced with a 15 amp per bank

battery charger effective February 2009.

If the 10 amp per bank battery charger is not

defective and is being reinstalled continue with this work package.

•

If 10 amp per bank battery charge is defective and needs to be replaced, proceed to the

installation of 15 amp per bank battery charger (WP 0237.1).