TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 819 of 1390

TM 9-2320-328-13&P-2

0236-3

DRAFT

0236

INSTALLATION

NOTE

Perform Steps (1) through (3) if battery disconnect switch box was removed.

1.

Install battery disconnect switch box (2) on vehicle with two locknuts (15), four washers (14), and two

screws (13).

2.

Install two washers (12) and screws (11) on battery disconnect switch box (2) and vehicle.

3.

Install four wires (5) in battery disconnect switch box (2).

4.

Install battery disconnect switch (6) in battery disconnect switch box (2) with four screws (10), washers (9),

lockwashers (8), and nuts (7).

NOTE

Install wires as noted prior to removal.

5.

Install four wires (5) on battery disconnect switch (6) with four lockwashers (4) and nuts (3).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful

vapors, and are harmful to skin and clothing.

To avoid injury or death, keep away

from open fire and use in well-ventilated area.

If adhesive, solvent, or sealing

compound gets on skin or clothing, wash immediately with soap and water.

6.

Apply sealing compound to four wires (5), lockwashers (4), and nuts (3).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

- -

-

-

-

-

-

-

-

-

-

-

WARNING

ICON 30, 44, 27