TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 810 of 1390

TM 9-2320-328-13&P-2

0234-2

DRAFT

0234

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2.

Disconnect step light connector (5) from step light (6).

3.

Remove three locknuts (7), screws (8), and step light (6) from stowage compartment box (4).

Discard

locknuts.

NOTE

Perform Step (4) if step light connector was removed.

4.

Cut wire 1615 (9) and wire 2740 (10) from step light connector wire (11) and wire (12) (TM 9-2320-325-14&P)

END OF TASK

INSTALLATION

NOTE

Perform Step (1) if step light connector was removed.

1.

Connect step light connector wire (12) and wire (11) on wire 2740 (10) and wire 1615 (9)

(TM 9-2320-325-14&P)

2.

Install step light (6) on stowage compartment box (4) with three screws (8) and locknuts (7).

3.

Connect step light connector (5) on step light (6).

HWT1504