TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 808 of 1390

TM 9-2320-328-13&P-2

0233-2

DRAFT

0233

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Remove lens (7), gasket (8), and light bulb (9) from scent light (5).

4.

Remove gasket (10) from lens (7).

END OF TASK

INSTALLATION

NOTE

•

All scene lights are installed the same way.

Driver side front bezel box and scene light

shown.

•

Install scene light and gaskets as noted prior to removal.

1.

Install gasket (10) on lens (7).

2.

Install light bulb (9), gasket (8), and lens (7) on scene light (5).

3.

Install scene light (5) on bezel box (6) with four screws (4) and locknuts (3).

4.

Connect scene light connector (2) on upper driver side body wire harness connector (1).

END OF TASK

FOLLOW-ON MAINTENANCE

1.

Install light bezel cover (WP 0335)

2.

Connect batteries (TM 9-2320-325-14&P)

END OF TASK

END OF WORK PACKAGE

HWT1645