TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 799 of 1390

TM 9-2320-328-13&P

0230-3

DRAFT

0230

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Cab front lightbar needs to be removed to access mounting bracket hardware.

7.

Remove cab front lightbar (15) (WP 0224).

NOTE

Note position of cushion clip prior to removal to ensure proper installation.

8.

Remove two nuts (16), lockwashers (17), and cushion clips (18) from screws (19).

Discard lockwashers.

9.

Remove two nuts (20), lockwashers (21), four washers (22), two screws (19), and mounting bracket (9) from

cab roof (23).

Discard lockwashers.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

- -

-

-

-

-

-

-

-

-

-

-

HWT1622A