TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 797 of 1390

TM 9-2320-328-13&P

0230-1

DRAFT

0230

FIELD LEVEL MAINTENANCE

ROOF MOUNTED CLEARANCE LIGHT(S) REPLACEMENT

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

All three clearance lights are removed the same way.

Driver side shown.

1.

Remove two screws (1) and cover (2) from mounting base (3).

NOTE

Lamp must be rotated 90 degrees in order to remove lamp from mounting base.

2.

Remove lamp (4) from mounting base (3).

•

Lamp will only function if correctly installed on rubber mounting of pigtail.

Plastic tabs on

lamp must align with openings on rubber mounting of pigtail.

It is possible to force lamp

on rubber mounting of pigtail in opposite position, which will not allow lamp to operate.

•

Note position of lamp on rubber mounting of pigtail prior to removal to ensure proper

installation.

3.

Remove lamp (4) from rubber mounting of pigtail (5).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT0257

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Tags, Identification (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

Lockwasher (2)

Lockwasher (2)

Locknut (4)

References

WP 0391, Fig. 27, 28

Equipment Conditions

Batteries disconnected (TM 9-2320-325-14&P)