TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 788 of 1390

TM 9-2320-328-13&P-2

0227-2

DRAFT

0227

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Remove two locknuts (5), screws (6), and light bracket (3) from bracket (7).

Discard locknuts.

NOTE

•

Tag and mark wires prior to removal to ensure proper installation.

•

Remove cable ties as required.

4.

Cut wire 1606 (8) and wire 1640 (9) (TM 9-2320-325-14&P), and remove light bracket (3) from vehicle.

5.

Remove grommet (10) from bracket (7).

6.

Remove two nuts (11), four washers (12), two lockwashers (13), screws (14), and bracket (7) from vehicle.

Discard lockwashers.

END OF TASK

INSTALLATION

1.

Install bracket (7) on vehicle with two screws (14), lockwashers (13), four washers (12), and nuts (11).

2.

Install grommet (10) on bracket (7).

NOTE

Install cable ties as required.

3.

Repair wire 1606 (8) and wire 1640 (9) (TM 9-2320-325-14&P)

4.

Install light bracket (3) on bracket (7) with two screws (6) and locknuts (5).

HWT1569