TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 800 of 1390

TM 9-2320-328-13&P

0230-4

DRAFT

0230

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

10. Remove four locknuts (24), screws (25), mounting base (3), and gasket (26) from mounting bracket (9).

Discard locknuts.

END OF TASK

INSTALLATION

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

All three clearance lights are installed the same way.

Driver side shown.

1.

Install gasket (26) and mounting base (3) on mounting bracket (9) with four screws (25) and locknuts (24).

HWT1800B