TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

  TM-9-2320-328-13-P-2 - Page 807 of 1390

TM 9-2320-328-13&P-2
0233-1
DRAFT
0233
FIELD LEVEL MAINTENANCE
SCENE LIGHT(S) REPLACEMENT
INITIAL SETUP:
REMOVAL
NOTE
All scene lights are removed the same way.
Driver side front bezel box and scene light
shown.
Tag and mark wires prior to removal to ensure proper installation.
1.
Disconnect upper driver side body wire harness connector (1) from scene light connector (2).
NOTE
Note top of scene light and gaskets prior to removal to ensure proper installation.
2.
Remove four locknuts (3), screws (4), and scene light (5) from bezel box (6).
Discard locknuts.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
HWT1645A
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(WP 0398, Item 17)
Materials/Parts
Tags, Identification (WP 0400, Item 23)
Locknut (4)
References
WP 0391, Fig. 21
Equipment Conditions
Batteries disconnected (TM 9-2320-325-14&P)
Light bezel cover removed (WP 0335)


Back to Top