TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 818 of 1390

TM 9-2320-328-13&P-2

0236-2

DRAFT

0236

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Tag and mark wires before removal to ensure proper installation.

2.

Remove four nuts (3), lockwashers (4), and wires (5) from battery disconnect switch (6).

Discard

lockwashers.

3.

Remove four nuts (7), lockwashers (8), washers (9), screws (10), and battery disconnect switch (6) from

battery disconnect switch box (2).

Discard lockwashers.

NOTE

Perform Steps (4) through (7) if removing battery disconnect switch box.

4.

Remove four wires (5) from battery disconnect switch box (2).

5.

Remove two screws (11) and washers (12) from battery disconnect switch box (2) and vehicle.

6.

Remove two screws (13), washers (14), and locknuts (15) from battery disconnect switch box (2) and vehicle.

Discard locknuts.

7.

Remove battery disconnect switch box (2) from vehicle.

END OF TASK

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT1797