TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 958 of 1390

TM 9-2320-328-13&P-2

0268-4

DRAFT

0268

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Perform Steps (6) through (9) if brackets need to be removed.

6.

Remove two screws (19) and waterproof splice box (4) from bracket (20).

7.

Remove two nuts (21), lockwashers (22), four washers (23), and two screws (24) from bracket (20) and

bracket (25).

Discard lockwashers.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

8.

Remove two locknuts (26), bracket (25), cradle (27), and U-bolt (28) from intake pipe (29).

Discard locknuts.

HWT2819

HWT2820