TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 959 of 1390

TM 9-2320-328-13&P-2

0268-5

DRAFT

0268

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

9.

Remove three nuts (30), lockwashers (31), six washers (32), three screws (33), and bracket (20) from

bracket (34).

Discard lockwashers.

END OF TASK

INSTALLATION

NOTE

Perform Steps (1) through (5) if brackets need to be installed.

1.

Install bracket (20) on bracket (34) with three screws (33), six washers (32), three lockwashers (31), and

nuts (30).

2.

Install cradle (27) and bracket (25) on intake pipe (29) with U-bolt (28) and two locknuts (26).

Do not tighten

locknuts.

3.

Install bracket (20) on bracket (25) with two screws (24), four washers (23), two lockwashers (22), and

nuts (21).

4.

Tighten two locknuts (26).

5.

Install waterproof splice box (4) on bracket (20) with two screws (19).

HWT2821