TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009
TM-9-2320-328-13-P-2

  TM-9-2320-328-13-P-2 - Page 995 of 1390

TM 9-2320-328-13&P-2
0274-5/(6 blank)
DRAFT
0274
TERMINAL BLOCK AT D1 STOWAGE COMPARTMENT REMOVAL
NOTE
•
Tag and mark wires prior to removal to ensure proper installation.
•
Remove cable ties as required.
1.
Remove nut (1), lockwasher (2), washer (3), and five wires (4) from screw (5).
Discard lockwasher.
2.
Remove two locknuts (6), washers (7), screws (8), and terminal block (9) from wire harness bracket (10).
Discard locknuts
END OF TASK
TERMINAL BLOCK AT D1 STOWAGE COMPARTMENT INSTALLATION
CAUTION


Back to Top