TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 993 of 1390

TM 9-2320-328-13&P-2

0274-3

DRAFT

0274

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Install cab instrument panel A (2) on cab instrument panel assembly (3) with six screws (1).

END OF TASK

TERMINAL BLOCK ON FRAME RAIL BY BATTERY DISCONNECT SWITCH REMOVAL

NOTE

•

Tag and mark wires prior to removal to ensure proper installation.

•

Remove cable ties as required.

1.

Remove nut (1), washer (2), and wires (3) from screw (4).

2.

Remove two locknuts (5), washers (6), screws (7), and terminal block (8) from wire harness bracket (9).

Discard locknuts.

END OF TASK

HWT2822

HWT2592