TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 985 of 1390

TM 9-2320-328-13&P-2

0272-3/(4 blank)

DRAFT

0272

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

3.

Install two door seals (7) on cover (8).

4.

Install door (6) on two hinges (2) with four screws (5), eight washers (4), and four locknuts (3).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Springs are under pressure.

Wear safety goggles and use caution when removing

or installing springs, snaprings, retaining rings, and other parts under spring

tension.

These parts can act as projectiles, resulting in serious injury to personnel.

5.

Install two springs (1) on hinges (2).

END OF TASK

FOLLOW-ON MAINTENANCE

1.

Install power cable assembly (SINCGARS) (WP 0260)

2.

Install radio/transmitter, amplifiers, and communication cables (TM 11-5820-890-10-1)

END OF TASK

END OF WORK PACKAGE

HWT1817

WARNING

ICON 26