TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 983 of 1390

TM 9-2320-328-13&P-2

0272-1

DRAFT

0272

FIELD LEVEL MAINTENANCE

COVER, DOOR, AND ELECTRONIC MOUNTING BASE REPLACEMENT (SINCGARS)

INITIAL SETUP:

REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Springs are under pressure.

Wear safety goggles and use caution when removing

or installing springs, snaprings, retaining rings, and other parts under spring

tension.

These parts can act as projectiles, resulting in serious injury to personnel.

1.

Remove two springs (1) from hinges (2).

2.

Remove four locknuts (3), eight washers (4), four screws (5), and door (6) from two hinges (2).

Discard

locknuts.

3.

Remove two door seals (7) from cover (8).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT1817

WARNING

ICON 26

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Locknut (4)

Locknut (4)

Lockwasher (8)

References

WP 0391, Fig. 37

Equipment Conditions

Radio/transmitter, amplifiers, and communication

cables removed (TM 11 5820-890-10-1)

Power cable assembly (SINCGARS)

removed (WP 0260)