TM-9-2320-328-13-P-2

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 2 OF 3

MARCH 2009

TM-9-2320-328-13-P-2 - Page 978 of 1390

TM 9-2320-328-13&P-2

0271-2

DRAFT

0271

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

2.

Remove two screws (7), washers (8), and shutoff control valve manifold (9) from bracket (10).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

All shutoff control valves are removed the same way.

Tank to pump control valve shown.

3.

Disconnect tank-to-pump valve connector (11) from tank-to-pump valve control wire harness connector (12).

HWT2425

HWT2426