TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 200 of 844

TM 9-2320-328-13&P-3

0350-12

DRAFT

0350

Change 1

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Perform Steps (5) through (7) if door latch need to be removed.

5.

Remove nut (9), lockwasher (10), keeper (11), and latch bar (12) from door latch (13).

Discard lockwasher.

6.

Remove nut (14), lockwasher (15), and door latch (13) from driver side hard suction hose compartment

door (1).

Discard lockwasher.

NOTE

Note position of nut prior to removal to ensure proper installation.

7.

Remove nut (16) from door latch (13).

END OF TASK

HARD SUCTION HOSE COMPARTMENT DOOR INSTALLATION

NOTE

•

Both hard suction hose compartment doors are installed the same way.

Driver side

shown.

•

Perform Steps (1) through (3) if door latch was removed.

•

Install nut as noted in removal.

1.

Install nut (16) on door latch (13).

2.

Install latch (13) on driver side hard suction hose compartment door (1) with lockwasher (15) and nut (14).

3.

Install latch bar (12) on door latch (13) with keeper (11), lockwasher (10), and nut (9).

HWT2764