TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 301 of 844

TM 9-2320-328-13&P-3

0371-1

DRAFT

0371

FIELD LEVEL MAINTENANCE

BUMPER TURRET MOUNT REPLACEMENT

INITIAL SETUP:

REMOVAL

NOTE

•

Note quantity and position of shims prior to removal to ensure proper installation.

•

Shims are positioned between bumper turret mount, and bumper turret pipe.

1.

Remove two locknuts (1), three shims (2), and U-bolt (3) from bumper turret mount (4) and bumper turret

pipe (5).

Discard locknuts.

NOTE

•

Note position of washers prior to removal to ensure proper installation.

•

Window deluge brackets are attached to outside of bumper turret mount.

2.

Remove four nuts (6), lockwashers (7), eight washers (8), four screws (9), and two window deluge

brackets (10) from bumper turret mount (4).

Discard lockwashers.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT0221

Tools and Special Tools

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Locknut (2)

Lockwasher (4)

Lockwasher (2)

Personnel Required

MOS 63B Wheeled vehicle mechanic (2)

References

WP 0391, Fig. 91, 94

Equipment Conditions

Bumper turret removed (WP 0378)

Skid plate grille removed (WP 0349)