TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 322 of 844

TM 9-2320-328-13&P-3

0375-4

DRAFT

0375

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

NOTE

Perform Step (7) if seal was removed from bracket.

8.

Install seal (14) on bracket (8).

9.

Install bumper turret control (10) on cover (3) with four washers (13), lockwashers (12), and screws (11).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

10. Connect bumper turret connector (9) on bumper turret control (10).

11. Install bracket (8) on cover (3) and bumper turret connector (9) with lockwasher (7) and screw (6).

12. Install cover (3) on cover (2) and side support (5) with five screws (4).

13. Install three screws (1) on two covers (2) and (3).

END OF TASK

HWT1510

HWT1509