TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 321 of 844

TM 9-2320-328-13&P-3

0375-3

DRAFT

0375

8.

Remove roll pin (18) and screw (19) from control knob (16).

9.

Loosen setscrew (20) and remove control knob (21) from switch (17).

10. Remove roll pin (22) and preformed packing (23) from control knob (21).

11. Loosen two setscrews (24) and remove control knob (25) from switch (26).

12. Remove preformed packing (27) and spacer (28) from control knob (25).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

13. Remove guard (29) and lamp (30) from bumper turret control box cover (31).

END OF TASK

INSTALLATION

1.

Install lamp (30) and guard (29) on bumper turret control box cover (31).

NOTE

Perform Steps (2) through (7) if control knobs were removed.

2.

Install spacer (28) and preformed packing (27) on control knob (25).

NOTE

Install control knobs on switches as noted prior to removal.

3.

Install control knob (25) on switch (26) and tighten two setscrews (24).

4.

Install preformed packing (23) and roll pin (22) on control knob (21).

5.

Install control knob (21) on switch (17) and tighten setscrew (20).

6.

Install screw (19) and roll pin (18) on control knob (16).

7.

Install control knob (16) on switch (17) and tighten setscrew (15).

HWT2311