TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 333 of 844

TM 9-2320-328-13&P-3

0376.1-1

DRAFT

0376.1

Change 1

FIELD LEVEL MAINTENANCE

POWER STEERING PUMP REMOVAL/MODIFICATION/INSTALLATION AND ADAPTER REPLACEMENT

INITIAL SETUP:

POWER STEERING PUMP REMOVAL FROM ADAPTER

NOTE

•

The vehicle engine air compressor and steering pump have switched

positions (WP 0002).

By switching positions, fittings, and rotor vane housing positions

have changed on steering pump.

•

Tag and mark hoses prior to removal to ensure proper installation.

•

Remove cable ties as required.

•

Position suitable drain pan under hoses to catch excess oil.

•

Cap and plug hoses upon removal.

1.

Remove hose (1) from elbows (2).

2.

Remove hose (3) from elbow (4).

3.

Remove hose 2301 (5) from elbow (6).

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

HWT3437

Tools and Special Tools

Cap Set, Protective (WP 0398, Item 1)

Drain Pan (WP 0398, Item 4)

Tool Kit, General Mechanic’s: Automotive

(WP 0398, Item 17)

Materials/Parts

Adhesive, Sealant, Silicone RTV (WP 0400,

Item 3)

Compound, Sealing (WP 0400, Item 10)

Tags, Identification (WP 0400, Item 23)

Ties, Cable, Plastic (WP 0400, Item 26)

Lockwasher (2)

Gasket (1)

Preformed Packing (1) (P/N 22617-8)

Materials/Parts (continued)

Preformed Packing (2)

Lockwasher (5)

Gasket (1) (Prior To S/N 106926)

Gasket (1) (S/N 106926, 106928, and Above)

References

TM 9-2320-325-14&P (Figure 272)

WP 0002

WP 0391, Fig. 4

Equipment Conditions

Hydraulic reservoir drained

(TM 9-2320-325-14&P)