TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009
TM-9-2320-328-13-P-3

  TM-9-2320-328-13-P-3 - Page 94 of 844

TM 9-2320-328-13&P-3
0339-14
DRAFT
0339
Change 1
PUMP HOUSE PANEL G REMOVAL
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1.
Remove eight screws (1), lockwashers (2), and washers (3) from front of pump house panel G (4).
Discard
lockwashers.
2.
Remove two screws (5), lockwashers (6), and washers (7) from pump house panel I (8) and pump house
panel G (4).
Discard lockwashers.
3.
Remove six screws (9), lockwashers (10), washers (11), and pump house panel G (4) from vehicle.
Discard
lockwashers.
4.
Remove small compartment door from pump house panel G (4) (WP 0350).
END OF TASK
PUMP HOUSE PANEL G INSTALLATION
1.
Install small compartment door on pump house panel G (4) (WP 0350).
2.
Install pump house panel G (4) on vehicle with six washers (11), lockwashers (10), and screws (9).
3.
Install two washers (7), lockwashers (6), and screws (5) on pump house panel I (8) and G (4).
4.
Install eight washers (3), lockwashers (2), and screws (1) on front of pump house panel G (4).
END OF TASK
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
HWT3421


Back to Top