TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009
TM-9-2320-328-13-P-3

  TM-9-2320-328-13-P-3 - Page 87 of 844

TM 9-2320-328-13&P-3
0339-7
DRAFT
0339
Change 1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
4.
Remove four screws (14), washers (15), and two cover plates (16) from pump house panel B (5).
5.
Remove cap (17) from pipe (18).
6.
Remove three screws (19), lockwashers (20), washers (21), clip (22), and pump house panel B (5) from
vehicle.
Discard lockwashers.
END OF TASK
PUMP HOUSE PANEL B INSTALLATION
1.
Install pump house panel B (5) and clip (22) on vehicle with three washers (21), lockwashers (20), and
screws (19).
2.
Install cap (17) on pipe (18).
3.
Install two cover plates (16) on pump house panel B (5) with four washers (15) and screws (14).
HWT2773


Back to Top