TM-9-2320-328-13-P-3

HEMTT-BASED WATER TENDER (HEWATT)

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST); PART 3 OF 3

MARCH 2009

TM-9-2320-328-13-P-3 - Page 100 of 844

TM 9-2320-328-13&P-3

0339-20

DRAFT

0339

Change 1

PUMP HOUSE PANEL K REMOVAL

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

1.

Open pump house panel K access door (WP 0008).

2.

Disconnect main wire harness connector (1) from beacon light connector (2).

3.

Remove 19 screws (3) and pump house panel K (4) from vehicle.

4.

Remove two locknuts (5), screws (6), and beacon light (7) from pump house panel K (4). Discard locknuts.

5.

Remove grommet (8) from pump house panel K (4).

6.

Remove small compartment door and pump house panel K access door (WP 0350).

END OF TASK

PUMP HOUSE PANEL K INSTALLATION

1.

Install pump house panel K access door and small compartment door (WP 0350).

2.

Install grommet (8) on pump house panel K (4).

3.

Install beacon light (7) on pump house panel K (4) with two screws (6) and locknuts (5).

4.

Install pump house panel K (4) on vehicle with 19 screws (3).

5.

Connect main wire harness connector (1) on beacon light connector (2).

6.

Close pump house panel K access door (WP 0008).

END OF TASK

HWT2777