TM-9-2320-338-10
TRUCK, CARGO, 8X8, M977A4
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-338-10 - Page 14 of 1120
•
Never crawl under equipment when performing maintenance unless
equipment is securely blocked. Failure to comply may cause injury
or death to personnel.
•
Keep clear of equipment when it is being raised or lowered. Failure
to comply may cause injury or death to personnel.
•
Do not work on any item supported only by lift jacks or hoist. Always
use blocks or proper stands to support the item prior to any work.
Failure to comply may result in injury or death to personnel.
•
Do not lift a load greater than the rated load capacity of the crane or
materiel handling equipment. Failure to comply may result in injury
or death to personnel or damage to equipment.
•
Do not allow heavy components to swing while hanging by lifting
device. Failure to comply may cause injury or death to personnel.
•
Any part or component that weighs between 50 lbs (23 kg) and 75
lbs (34 kg) must be removed with the aid of an assistant. Any part or
component that weighs over 75 lbs (34 kg) must be removed with the
aid of an assistant and a lifting device. Failure to comply may cause
injury or death to personnel.
•
Ensure all chains, hooks, and slings are in good condition and are of
correct capacity. Ensure hooks are positioned correctly. Failure to
comply may result in injury or death to personnel.
WARNING
MOVING MACHINERY
•
Use extreme care when operating or working near moving machinery
including running engine, rotating shafts, and other moving parts.
Failure to comply may result in injury or death to personnel.
•
Use extreme care when measuring voltage while engine is running
around rotating fan blade and hot engine parts. Failure to comply may
result in injury or death to personnel.
TM 9-2320-338-10
l
Back to Top
