TM-9-2320-338-10

TRUCK, CARGO, 8X8, M977A4

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008
TM-9-2320-338-10

  TM-9-2320-338-10 - Page 15 of 1120

WARNING
PARTS UNDER PRESSURE
•
Wear safety goggles and use caution when removing or installing
springs, snap rings, retaining rings, and other parts under spring
tension. These parts can act as projectiles. Failure to comply may
result in injury or death to personnel.
•
The radiator is very hot and pressurized during vehicle operation. Let
radiator cool before removing cap. Failure to do so can result in
serious burns.
•
During pressure tests, ensure air pressure is drained to 0 psi (0 kPa)
before taking off any components. If pressure is not released, plates
or line could blow off and harm personnel. Do not drain air from tank
with any part of body in air spray path. Skin embolisms and/or debris
in eyes can occur from released pressure.
•
High air pressure may be released from valve stem when valve core
is removed. Stay clear of valve stem after core is removed. Ensure
all personnel wear suitable eye protection. Failure to comply may
result in injury to personnel.
•
Stand clear of trajectory area during deflation or personal injury or
death may result.
•
Lock-ring is under tension. If lock-ring breaks loose it could cause
injury to personnel. Keep hands and fingers away from lock-ring
when removing.
•
Never adjust relief valve so that personnel must stand on strongback
to operate latch.
•
If there is any residual pressure in tank when relief valve is open,
personnel may lose their balance and fall. Failure to comply may
result in injury or death to personnel.
•
Use extreme care when removing or installing spring retainers.
Spring retainers are under tension and can act as projectiles when
released suddenly. Ensure proper eye protection is worn to prevent
injury to personnel.
•
Use extreme care when removing or installing springs. Springs are
under tension and can act as projectiles when released. Ensure
proper eye protection is worn to prevent injury to personnel. Eye
TM 9-2320-338-10
m


Back to Top