TM-9-2320-338-10
TRUCK, CARGO, 8X8, M977A4
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-338-10 - Page 16 of 1120
protection is required during all grinding operations. Failure to comply
may result in serious injury to personnel.
•
Failure to relieve tank pressure may result in sudden, unexpected
loss of pressure. Failure to comply may result in personal injury or
death.
•
Do not remove the radiator cap when the engine is hot, as steam and
hot coolant can escape. Failure to comply may result in personal
injury or death.
WARNING
HEAVY PARTS
Any part or component that weigh over 50 lbs (23 kg) must be removed
with the aid of an assistant and a lifting device. Failure to comply may
result in personal injury or death.
WARNING
CRANE SYSTEM
•
Always refer to the range diagram BEFORE making any lift. It is
extremely important that the crane is properly leveled to prevent
overstressing.
•
Do not operate crane unless outriggers are set up. Always chock front
wheels when using outriggers. Failure to comply may result in injury
or death to personnel.
•
When using crane on any vehicle, park vehicle clear of all overhead
powerlines. If operating crane under power lines, do not allow vehicle
to contact high-voltage connections. Failure to comply will result in
death to personnel.
•
Do not stand under crane. Failure to comply may result in injury or
death to personnel.
•
Refuse to work with worn, frayed, or damaged wire rope. Always wear
heavy gloves when handling winch cables; never let cable run
TM 9-2320-338-10
n
Back to Top
