TM-9-2320-341-10

TRUCK, TRACTOR, LIGHT EQUIPMENT TRANSPORTER (LET), 8X8 M983A4 LET

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-341-10 - Page 295 of 962

OPERATOR MAINTENANCE

HEAVY-DUTY WINCH OPERATION USING REMOTE-CONTROL UNIT

INITIAL SETUP:

Not Applicable

PREPARE TO OPERATE HEAVY-DUTY WINCH

WARNING

•

Using remote-control unit and operating heavy-duty winch away from

vehicle will lessen the possibility of injury or death to personnel if

winch cable separates under tension.

•

Excessive noise levels are present any time the heavy-duty winch is

operating. Wear single hearing protection (earplugs or equivalent)

while working around equipment when it is running. Failure to comply

may result in injury or death to personnel. Seek medical aid should

you suspect a hearing problem.

NOTE

This procedure is a two soldier task.

1.

Start engine. (WP 0044)

2.

Position vehicle for straight pull and on solid ground so tires have good traction.

3.

Set transmission range selector (1) to N (neutral).

TM 9-2320-341-10

0042

0042-1