LOWER TIRE CARRIER - Continued
9
10
8
11
Figure 5.
7.
Remove cap from auxiliary air fitting (9).
8.
Connect air hose (10) to auxiliary air fitting (9).
NOTE
•
It may be necessary to simultaneously hold lever on air hose with tire
carrier pump power control dependant on type air hose used.
•
The operator will notice a small amount of oil being expelled with the
air from the tire carrier pump each time it cycles, this is a normal
condition.
9.
Press and hold power control (11). The tire carrier pump cyclic rate will be rapid at
first, and then slow noticeably. As cyclic rate slows, the operator should notice tire
carrier begin to move.
TM 9-2320-342-10-1
0114
0114-5