TM-9-2320-343-10

TRUCK, CARGO, 8X8 M985A4 W/WINCH AND M985A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-343-10 - Page 948 of 1128

Table 1.

PMCS - WEEKLY - Continued

Item

No.

Interval

Item to

be

Checked

or

Serviced

Procedure

Equipment

Not Ready/

Available If:

NOTE

•

TELESCOPE and HOIST

levers should be

operated at the same

time.

•

Crane movement from

one lever may be slower

than the other when

operating two levers

together.

(3) Move TELESCOPE con-

trol lever to OUT position

to extend boom while

moving hoist control lev-

er to DOWN position to

pay out cable.

Extensions

do not come

out.

TELESCOPE

CONTROL

LEVER

HOIST

CONTROL

LEVER

CABLE

Figure 25.

(4) Check first, second, and

third stages of boom for

broken welds or obvious

damage.

There are

broken

welds or ob-

vious dam-

age to

boom.

TM 9-2320-343-10

0145

0145-44