TM-9-2320-343-10

TRUCK, CARGO, 8X8 M985A4 W/WINCH AND M985A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-343-10 - Page 957 of 1128

Table 1.

PMCS - WEEKLY - Continued

Item

No.

Interval

Item to

be

Checked

or

Serviced

Procedure

Equipment

Not Ready/

Available If:

•

Do not let cable become

slack or cable may get

tangled on drum.

NOTE

•

TELESCOPE and HOIST

levers should be

operated at the same

time.

•

Crane movement from

one lever may be slower

than the other when

operating two levers

together.

(5) Move TELESCOPE con-

trol lever to OUT position

while moving HOIST

control lever to DOWN

position to pay out cable.

Extensions

will not

come out, or

cable will

not pay out.

(6) Move HOIST control lev-

er in UP position to reel

in cable.

Cable will

not reel in.

(7) Check that crane and

ENGINE HIGH IDLE do

not operate when RE-

MOTE CONTROL UNIT

is in MHC-SHUTDOWN

position. Notify organiza-

tional maintenance if

crane and ENGINE

HIGH IDLE operates

when in MHC-SHUT-

DOWN position.

Crane will

operate and

engine

speed will

increase to

1500 rpm.

TM 9-2320-343-10

0145

0145-53