TM-9-2320-343-10

TRUCK, CARGO, 8X8 M985A4 W/WINCH AND M985A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-343-10 - Page 962 of 1128

Table 1.

PMCS- SEMIANNUAL - Continued

Item

No.

Interval

Item to

be

Checked

or

Serviced

Procedure

Equipment

Not Ready/

Available If:

NOTE

•

Lubrication intervals are

for normal operating

conditions. Intervals may

be shortened as required

for severe operating

conditions.

•

Clean all lubrication

points with cleaning

compound, solvent and

allow to dry prior to

servicing.

•

When using a grease

gun, apply lubricant to the

fitting until clean lubricant

squeezes out of the part

being lubricated.

•

Always refer to lubrication

instructions (WP 0148) to

ensure equipment has

correct lubricants

appropriate to operating

environment (expected

continuous

temperatures). If not,

remove/drain and

reapply/refill equipment

with appropriate

lubricants for operating

environment as

prescribed in lubrication

instructions. (WP 0148)

1

Semian-

nual

Brake

System

Lubricate axles No. 1, No. 2, No. 3,

and No. 4 brake camshafts and slack

Fitting will

not purge

old lubricant

TM 9-2320-343-10

0146

0146-2