TM-9-2320-344-10

TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985A4GMT

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-344-10 - Page 253 of 1012

WARNING

Hearing protection is required for all personnel in immediate area when

vehicle engine is in high-idle mode. Failure to comply may result in injury

to personnel.

13. Set ENGINE HIGH IDLE ON/OFF switch (14) to ON position.

14. Push ENGINE HIGH IDLE LATCH switch (15) upward to LATCH position and release.

Engine speed will increase to approximately 1500 rpm.

NOTE

•

If engine speed does not increase and maintain approximately 1500

rpm, move ENGINE HIGH IDLE ON/OFF switch to off position and

repeat Steps (13) and (14).

•

Outrigger control handles may not easily engage “down” position due

to buildup of dirt, paint, etc. If this is the case, clean and lubricate area

(if possible) and/or work control handle back and forth several times

to work obstruction out.

15. Turn outrigger control handle (16) on outrigger leg (2) until it aligns with down arrow

(17).

TM 9-2320-344-10

0036

0036-11