TM-9-2320-344-10

TRUCK, CARGO, GUIDED MISSILE TRANSPORTER (GMT), 8X8, M985A4GMT

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-344-10 - Page 280 of 1012

engaged can also cause overheating. If controls start to stick in open

position or if overheating is suspected, discontinue crane operations,

shut off PTO pump, and notify your supervisor. Failure to comply may

result in damage to equipment.

NOTE

The operator is able to use the controls one at a time or in pairs to

move the hook or load to the desired position.

aa. Read and carefully follow the above warnings, cautions, and notes for crane

operation.

ab. When crane operation is completed, push remote-control ON/OFF power switch

(8) to OFF position.

ac. Set ENGINE HIGH IDLE ON/OFF switch (15) to OFF position to decrease engine

rpm to idle.

ad. Press power button (9) on power display box, indicator (10) will go out.

ae. Disconnect remote-control cable (4) from front remote station (14) and reconnect

weather cap (13).

af. Disconnect remote-control cable (4) from remote-control unit (3).

ag. Return remote-control unit (3) and remote-control cable (4) to stowage

compartment (5).

ah. Move MANUAL REMOTE selector lever (2) to MANUAL position (shown).

TM 9-2320-344-10

0036

0036-38