NOTE
Dashboard parking brake indicator will illuminate when PARKING
BRAKE control is applied.
18. Stop vehicle, pull out PARKING BRAKE control (10).
19. Set transmission range selector (1) to N (neutral).
NOTE
Dashboard HIGH IDLE indicator will illuminate when HIGH IDLE switch
is positioned on.
20. Set HIGH IDLE switch (6) to on position.
21. Move joystick (7) to LOAD position.
WARNING
When NO TRANSIT indicator is illuminated, vehicle may be maneuvered
in the immediate vicinity of the loading/unloading site. However, vehicle
is unsafe for road travel. Do not perform open-road driving when NO
TRANSIT indicator is illuminated. Failure to comply may result in injury
or death to personnel and damage to equipment.
22. Release joystick (7) when main frame and LHS hook arm are fully stowed and NO
TRANSIT indicator (14) light has gone out.
NOTE
Dashboard HIGH IDLE indicator will go out when HIGH IDLE switch is
positioned off.
23. Set HIGH IDLE switch (6) to off position.
CAUTION
While maneuvering vehicle in the immediate vicinity of the loading or un-
loading site, LHS MODE SELECT switch may be in any setting. However,
LHS MODE SELECT switch must be set to OFF prior to road travel, to
prevent damage to main frame and hook arm cylinders.
TM 9-2320-346-10
0043
0043-5