NOTE
It may be necessary to repeat Steps (33) and (34) several times in order
to clear hook arm from hook bar.
33. Move joystick (24) to UNLOAD to allow top of LHS hook (34) to clear BAP hook bar
(35).
34. Set transmission range selector (20) to D (drive) and move forward slowly, making sure
LHS lift hook (34) clears BAP hook bar (35).
NOTE
Dashboard parking brake indicator will go out when PARKING BRAKE
control is released.
35. Push in PARKING BRAKE control (19).
36. Move vehicle forward approximately 5 ft. (1.5 m).
NOTE
Dashboard parking brake indicator will illuminate when PARKING
BRAKE control is applied.
37. Pull out PARKING BRAKE control (19).
38. Set transmission range selector (20) to N (neutral).
WARNING
When NO TRANSIT indicator is illuminated, vehicle may be maneuvered
in the immediate vicinity of the loading/unloading site. However, vehicle
is unsafe for road travel. Do not perform open-road driving when NO
TRANSIT indicator is illuminated. Failure to comply may result in injury
or death to personnel and damage to equipment.
CAUTION
While maneuvering vehicle in the immediate vicinity of the loading or un-
loading site, LHS MODE SELECT switch may be in any setting. However,
LHS MODE SELECT switch must be set to OFF/TRANSPORT prior to
road travel, to prevent damage to main frame and hook arm cylinders.
TM 9-2320-346-10
0044
0044-15