TM-9-2320-346-10
TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH
TECHNICAL MANUAL; OPERATOR'S MANUAL
OCTOBER 2008
TM-9-2320-346-10 - Page 742 of 1184
5
Alison
Transmision
8X8
TRAILER
AIR SUPLY
PUSHT
M
M
11
9
6
10
7
8
4
Figure 3.
7.
Set transmission range selector (6) to N (neutral).
CAUTION
•
Do not position HYD ENABLE switch on with HIGH IDLE switch on.
Engaging the HYD ENABLE with HIGH IDLE switch on may result in
sudden application of hydraulic pressure to the LHS, resulting in
damage to equipment.
•
HYD ENABLE switch must be positioned off before road transport or
severe equipment damage could result.
8.
Position HYD ENABLE switch (7) to ON position. MAIN HYD ENABLE indicator (8) will
illuminate.
9.
Turn LHS MODE SELECT switch (9) to MAN H.A.
NOTE
Dashboard HIGH IDLE indicator will illuminate when HIGH IDLE switch
is positioned on.
10. Set HIGH IDLE switch (10) to on position.
11. To raise and move hook arm toward the BAP, move joystick (11) to UNLOAD and hold.
////////////////////////////////////////////////////////////////////////////////////
TM 9-2320-346-10
0107
0107-4
////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Back to Top
