12. Release joystick (11) when hook arm completes its full movement rearward.
NOTE
Dashboard HIGH IDLE indicator will go out when HIGH IDLE switch is
positioned off.
13. Set HIGH IDLE switch (10) to off position.
14. Turn LHS MODE SELECT switch (9) to MAN M.F.
NOTE
Dashboard HIGH IDLE indicator will illuminate when HIGH IDLE switch
is positioned on.
15. Set HIGH IDLE switch (10) to on position.
NOTE
When LHS hook moves below level of BAP hook bar, release joystick.
16. To raise and move main frame toward the BAP, move joystick (11) to UNLOAD and
hold.
NOTE
Dashboard HIGH IDLE indicator will go out when HIGH IDLE switch is
positioned off.
17. Set HIGH IDLE switch (10) to off position.
NOTE
Dashboard parking brake indicator will go out when PARKING BRAKE
control is released.
18. Push in PARKING BRAKE control (4) or release service brake pedal (5).
NOTE
Have an assistant function as a ground guide.
19. Back up vehicle until aligned with the BAP.
20. Ensure LHS lifting hook tip (12) is slightly below and in line with the middle of the BAP
hook bar (13).
////////////////////////////////////////////////////////////////////////////////////
TM 9-2320-346-10
0107
0107-5
////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////