TM-9-2320-346-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-346-10 - Page 765 of 1184

OPERATOR MAINTENANCE

PREPARATION FOR EMERGENCY MANUAL REMOVAL OF BRIDGE ADAPTER

PALLET (BAP)

INITIAL SETUP:

Not Applicable

PERFORM PROCEDURE

WARNING

Do not attempt to lift a load greater than the rated load capacity of crane

or materiel-handling equipment. Failure to comply may result in injury or

death to personnel and damage to equipment.

NOTE

•

Manual mode operations using the cab control box are to be

performed only when the normal AUTO mode electric circuit is

malfunctioning.

•

This procedure is performed when a loaded BAP must be removed

using a crane or other handling system and must be done with help

of a higher maintenance level.

•

The BAP weighs 5,810 lbs (2 637 kg). The BAP with bridge bay

weighs 24,148 lbs (10 963 kg).

1.

Ensure main frame is fully stowed.

2.

Ensure that, if necessary, main frame is lowered using loading button of the solenoid

bypass procedure as necessary (WP 0106).

3.

Secure winch frame to the BAP. and ensure two winch frame locking levers (1) are in

the up position.

////////////////////////////////////////////////////////////////////////////////////

TM 9-2320-346-10

0110

0110-1

////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////