TM-9-2320-346-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8 M1977A4 W/WINCH AND M1977A4 W/O WINCH

TECHNICAL MANUAL; OPERATOR'S MANUAL

OCTOBER 2008

TM-9-2320-346-10 - Page 764 of 1184

NOTE

Ensure slave hoses are not stretched or run over during operations.

9.

Continue the unload operations using operable vehicles' controls.

10. After completion of operations:

NOTE

For BASE and A2 model CBT perform Step (a), for A4 model CBT

skip to Step (b).

a.

Set PTO ENGAGE switch (6) to OFF position. Indicator light (7) will go out.

b.

Set HYD ENABLE switch (6) to off position. MAIN HYD ENABLE indicator (7) will

go out.

c.

Shut off engine of both vehicles. (WP 0060)

NOTE

Ensure each vehicle has one of the two slave hydraulic hoses ac-

companying it.

d.

Disconnect slave hydraulic hoses and return to stowage (one to each vehicle).

e.

Reconnect both vehicles' return and supply hydraulic hoses.

END OF TASK

END OF WORK PACKAGE

////////////////////////////////////////////////////////////////////////////////////

TM 9-2320-346-10

0109

0109-6

////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////