TM-9-2320-361-10

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

OPERATOR'S MANUAL

DECEMBER 1988

TM-9-2320-361-10 - Page 164 of 392

TM 9-2320-361-10

2-26. OPERATION OF FUEL TANK TRUCK (Contd)

NOTE

• Bond only if two rods are used to ground.

• Perform steps 4 through 10 for bonding vehicles during fueling

procedures.

(4)

Extend ground wires (4) and (6) from cable reel (2) of fuel tank truck (3).

(5)

Attach ground wire (4) to ground rod (5).

(6)

Route ground wire (6) to frame of other vehicle (1) and attach to ground

rod (7).

(7)

Touch hose, drop tube, or discharge nozzle to filler cover before removal.

(8)

Keep filler nozzle in contact with filler hole at all times during fueling

procedure.

(9)

After filling is completed, close filler cover, remove ground wires (4)

and (6) and ground rods (5) and (7).

(10)

Retract ground wires (4) and (6) on cable reel (2) and stow on fuel tank

truck (3).

Change 2

2-104.3