TM-9-2320-361-10
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
OPERATOR'S MANUAL
DECEMBER 1988
TM-9-2320-361-10 - Page 169 of 392
TM 9-2320-361-10
2-26. OPERATION OF FUEL TANK TRUCK (Contd)
(7)
Unwind dispensing assembly (6).
(8)
Remove nozzle (7) from dispenser line (13) and remove filler cover (12)
from filler hole (11).
(9)
Remove padlock (10), lift cover clamp (8), and open manhole cover (9).
WARNING
Dispenser line should almost touch bottom of tank during filling to
decrease the build-up of vapors. Failure to do so may cause fire,
resulting in injury or death to personnel.
(10)
Place dispenser line (13) into tiller hole (11) to bottom of tank.
(11)
Turn automatic dump valve knob (17), pump delivery line gate valve
knob (16), and gravity delivery line gate valve knob (15) counterclockwise
to
open
position.
(12)
Remove fuel level gage (14).
NOTE
Ensure parking brake lever is applied.
(13)
Place transmission gearshift. lever (2) in middle (neutral) position.
(14)
Start engine (para. 2-14 or 2-15), push clutch pedal (5) in and hold. Place
transfer case shift lever (3) in middle (neutral) position.
CAUTION
Do not allow engine to run with transmission gearshift lever
ENGAGED, transfer case shift lever in NEUTRAL, and transfer
power takeoff lever in DISENGAGE positions. Failure to do so may
result in damage to equipment.
(15)
Engage transfer power takeoff lever (4), place transmission gearshift
lever (2) in “2” (second) position, and release clutch pedal (5). Ensure transfer
power takeoff lever (4) is engaged.
(16)
Slowly pull out hand throttle (1) to run engine at 1150 rpm. Fill tank as
needed. Check fuel level with fuel level gage (14).
2-108 Change 2
Back to Top
