TM-9-2320-361-10

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

OPERATOR'S MANUAL

DECEMBER 1988

TM-9-2320-361-10 - Page 193 of 392

TM9-2320-361-10

2-28. OPERATION OF SHOP VAN AND INSTRUMENT

REPAIR SHOP TRUCKS

a. Preparing Shop Van and Instrument Repair Shop Trucks for Use.

(1)

Unfasten ladder (1) and install on mounting brackets (4).

(2)

Remove padlock (3) and open right door (2).

(3)

Pull latch rod ring (6) down, lift latch rod (7), and open left door (5).

(4)

Lift latch (9), and slide down blackout panel (8) as necessary.

(5)

Press sliding member (12), lift ring (10), and lower sliding member (12)

while pulling ring (11

to open window (13).

b. Supplying 115-Volt AC Power to Van.

(1)

Place power switch (18) in down position.

NOTE

M 185A3 has an auxiliary power source receptacle mounted

below 11 5-volt AC receptacle. Perform steps (2) through (4),

as necessary, to use auxiliary power source receptacle.

2-132