TM-9-2320-361-10

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

OPERATOR'S MANUAL

DECEMBER 1988

TM-9-2320-361-10 - Page 239 of 392

TM9-2320-361-10

2-32. OPERATION OF EARTH BORING AND POLESETTING

MAINTENANCE TRUCKS (Contd)

NOTE

If derrick and winch are used to load/unload cable reel, refer

to e. of this para.

(1)

Remove retaining pin (6) and lift collapsible reel (3).

(2)

Install collapsible reel (3) on rear winch shaft (1) and turn it to the right

until shaft dowel pins (2) engage grooves (5) in reel spindle shaft (4).

WARNING

Ž

Ž

Ž

Make sure collapsible cable reel is properly mounted on

rear winch shaft before operating reel. Failure to do so may

result in injury or death to personnel.

Do not overload cable reel. Maximum pull on reel is

4,000 lb. A snapped cable may cause injury or death to

personnel.

Wear hand protection when handling cable. Broken cables

may cause injury to personnel.

Make sure cable ends are secure before installing or removing

cable from reel. If cable gets tangled, damage to equipment

may result.

2-178

CAUTION