TM-9-2320-361-10

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

OPERATOR'S MANUAL

DECEMBER 1988

TM-9-2320-361-10 - Page 310 of 392

TM 9-2320-361-10

3-16. FRONT WINCH SHEARPIN REPLACEMENT (Contd)

b. Installation.

(1)

(2)

(3)

(4)

ends.

WARNING

Be sure the front winch drive shaft shearpin is aluminum. Do

not substitute any other type metal pin for the shearpin, or

injury or death to personnel may result.

Coat new shearpin (5) with grease (use grease, GAA, Appendix D, Item 7).

Aline hole in yoke (4) with hole in drive shaft (1) and insert shearpin (5).

Use drift punch and hammer to tap shearpin (5) in place.

Install two new cotter pins (2) in shearpin (5) holes and bend back pin (2)

3-29