TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 1025 of 1207
TM 9-2320-361-20
14-14. HARDTOP MAINTENANCE
This task covers:
a. Removal
c. Assembly
b. Disassembly
d. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-361-10
MATERIALS/PARTS
TM 9-2320-361-20P
Ten lockwashers
EQUIPMENT CONDITION
Thirty locknuts
Parking brake set (TM 9-2320-361-10).
PERSONNEL REQUIRED
Two
a. Removal
1. Remove two screws (1) and lockwashers (2) from each side of roof (3) and windshield frame (13).
Discard two lockwashers (2).
2. Remove capscrew (11), washer (12), and locknut (4) from each side of roof (3) and windshield
frame (13). Discard locknut (4).
3. Remove fourteen screws (10), locknuts (5), and washers (6) and (9) from roof (3). Discard locknuts (5).
NOTE
Assistant will help with step 4.
4. Remove roof (3) and seal (7).
5. Remove two screws (19) and retainers (18) from back panel (8).
6. Remove fourteen locknuts (20), screws (15), and washers (16) from back panel (8) and cab (14).
Discard locknuts (20).
7. Remove back panel (8) and seal (17) from cab (14).
b. Disassembly
1. Remove eight nuts (21), lockwashers (22), screws (25), and frame cap (24) from back panel (8).
Discard lockwashers (22).
2. Remove fourteen nuts (28), washers (27), screws (26), and rear window (23) from back panel (8).
1. Install rear window (23) on back panel (8) with fourteen screws (26), washers (27), and nuts (28).
2. Install frame cap (24) on rear window (23) and back panel (8) with eight screws (25), new lock-
washers (22), and nuts (21).
14-20
Back to Top
