TM 9-2320-361-20
Table 2-4. Electrical Troubleshooting (Contd).
MALFUNCTION
TEST OR lNSPECTlON
CORRECTIVE ACTION
Test 7. Test fuel pump-to-ignition coil wiring harness.
Step 1. Disconnect wiring harness input from ignition coil.
Step 2. Set multimeter to 24 Vdc scale.
Step 3. Touch multimeter negative lead to pin B (neg) of wiring harness at ignition coil.
Step 4. Touch multimeter positive lead to pin A (pos) of wiring harness at ignition coil.
a. If voltage is present, go to test 9.
b. If voltage is not present, go to test 8.
2-140