TM 9-2320-361-20
Table 2-4. Electrical Troubleshooting (Contd).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test 8. Check continuity of ignition coil harness.
Step 1. Disconnect ignition coil harness from fuel pump and ignition coil.
Step 2. Set multimeter to RX1.
Step 3. Connect multimeter negative lead to lead 486 and multimeter positive lead to pin A.
a. If continuity is not present, repair harness (para. 4-51).
b. If continuity is present, go to test 9.
Test 9. Test manifold heater fuel system.
Refer to table 2-2, Mechanical Troubleshooting, malfunction 17, steps 2 through 4.
END OF TESTING!
2-141