TM-9-2320-361-20
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; UNIT MAINTENANCE
OCTOBER 1991
TM-9-2320-361-20 - Page 399 of 1207
TM 9-2320-361-20
3-42. RADIATOR AND BRACKETS REPLACEMENT
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-361-10
MATERIALS/PARTS
TM 9-2320-361-20P
Ten locknuts
EQUIPMENT CONDITION
Lockwasher
Antifreeze (Appendix C, Item 6)
Parking brake set (TM 9-2320-361-10).
Hood raised and secured (TM 9-2320-361-10).
PERSONNEL REQUIRED
Upper and lower radiator hose removed (para. 3-43).
Two
Brushguard removed (para. 10-8).
Fan removed (para. 3-40).
1. Remove locknut (8), washer (9), ground strap (10), lockwasher (11), and screw (1) from radiator (2).
Discard locknut (8) and lockwasher (11).
2. Remove two locknuts (6), washers (5), springs (7), and washers (4) from radiator mounting studs (3).
Discard locknuts (6).
CAUTION
Radiator core is easily damaged. Use care when working near or
handling radiator.
3. Remove locknut (15), screw (12), and rod assembly (14) from bracket (13). Discard locknut (15).
NOTE
Assistant will help with step 4.
4. Tilt radiator (2) forward and carefully lift out of vehicle.
NOTE
Perform step 5 only if radiator and draincock are damaged or if
radiator is being replaced.
5. Remove radiator cap (16) and draincock (17) from radiator (2).
6. Remove two shims (18) from radiator mounting studs (3).
7. Remove two locknuts (24), screws (22), and support (21) from left bracket (23) and right bracket (20).
Discard locknuts (24).
8. Remove four locknuts (25), screws (19), left bracket (23), and right bracket (20) from radiator (2).
Discard locknuts (25).
3-96
Back to Top
